Skip to main content

STEAM NOZZLES AND TYPES

 NOZZLE : 

Nozzle is a duct varying cross-sectional area in which the velocity increases with the corresponding drop in pressure.

It is main function is to produce a jet of steam with high velocity. For example, nozzles are used in steam turbines, gas turbines, in jet engines, rocket motors, flow measurement and many other applicants.




SHAPES OF NOZZLES :

Following 3 types of  Nozzles are important from the subject point of  view : 

1. CONVERGENT NOZZLE :

In Convergent nozzle, the cross-sectional area decreases from the inlet section to the outlet section.

2. DIVERGENT NOZZLE :

In Divergent nozzle, the cross sectional area increases from the inlet section to the outlet section.

3. CONVERGENT - DIVERGENT NOZZLE :

When the cross section of a nozzle first decreases form the inlet section to throat and then increases from its throat to outlet section, it is called a convergent - divergent nozzle.

Labels:

Comments

  1. priyaarawatJanuary 28, 2025 at 11:15 PM

    Great blog! I found the detailed explanation of steam nozzles and their types informative. The insights on different nozzle applications are very helpful, especially in understanding their versatility. I was also thinking about how similar principles could apply to water features, like fountains, where choosing the right fountain nozzle can make a huge difference in the aesthetics and performance. If you're considering professional advice or consultation for any water-related projects, I highly recommend BluRain. They are experts when it comes to creating stunning water features and providing the right solutions.

    ReplyDelete

Post a Comment

Popular posts from this blog

Advantages And Disadvantages Of Air Refrigeration System :

 Advantages Of  Air Refrigeration : 1. The refrigerant used namely air is cheap and easily available. 2. There is no danger of fire or toxic effects due to leakages. 3. The weight to ton of refrigeration ratio is less as compared to other systems. Disadvantages Of Air Refrigeration : 1. The quantity of  Refrigerant used per ton of refrigeration is high as compared to other systems. 2. The COP of the system is very low. Therefore running cost is high. 3. The danger of frosting at the expander valves is more as the air contains moisture content. 
Post a Comment
Read more

ELECTRICAL COMPARATORS AND ITS WORKING

Electrical Comparators are used as a means of  detecting and amplifying small movements of a work contacting elements. An electrical comparator consists essentially of  a pick-up head or transducer for converting a displacement into a corresponding change in current and a meter or recorder connected in the circuit to indicate the electrical change, calibrated to show in terms of displacement. Generally, an amplifier is needed to provide the requisite sensitivity and to match the characteristics of different parts of  the circuit. Electrical comparators can be classified according to the electrical principle used in the pick-up head. Most of the comparators use either a differential transformer, an inductance bridge, a strain gauge or a capacitor as a means of detecting movement of the gauging element. There are different types of  electrical comparators. One kind called an electrolimit gauge is used to check or measure the outside diameter of a  roll. The objec...
Post a Comment
Read more

SIMPLE CARBURETOR - CONSTRUCTION AND WORKING

CONSTRUCTION OF SIMPLE CARBURETOR :  The main Components of Simple Carburetor are : Float Chamber, float, nozzle, venturi, throttle valve, inlet valve, and metering jet . In the float chamber, a constant level of petrol is maintained by the float and a needle valve.  The float chamber is ventilated to atmosphere.  This is used to maintain atmospheric pressure inside the chamber. The float which is normally a metallic hollow cylinder rises and closes the inlet valve as the fuel level in the float chamber increases to certain level. The mixing chamber contains venturi, nozzle and throttle valve. The venturi tube is fitted with the inlet  manifold. This tube has a narrow opening called venturi. A nozzle is provided just below the centre of this venturi. The nozzle keeps the same level of petrol as that of the level in the float chamber. The mixing chamber has two butterfly valves.  One is to allow air into the mixing chamber known as choke valve. The other is to al...
Post a Comment
Read more