Skip to main content

Nuclear Holocaust and its Effects

It means destruction of Biodiversity by Nuclear equipment and nuclear bombs. In a holocaust, a large  number  of living beings are totally destroyed. Usually, this kind of  destructions are happened in a nuclear war.



Effect of Nuclear Holocaust :

1. Nuclear Winter :

Nuclear Bombardment will cause combustion of wood, plastics, petroleum, forest etc., Large quantity of black soot will be carried to stratosphere. Black soot will absorb all UV - radiations and will not allow the radiation to reach the earth. Therefore, cooling will result. Due to this cooling effect, water evaporation will also reduce. In stratosphere there won't be significant moisture to rain-out the thick soot. Thus, due to nuclear explosions. a process known as opposite to global warming will occur. This is called nuclear winter.



Effect of  Nuclear Winter :

i) Lowers the global temperature, even in summer the temperature will be at freezing temperature.

ii) Crop productivity will be reduced causing famines and human sufferings. 

2. It Ignite all combustible material, destroy all the living beings, material crushing, destruction of homes. 


Control Measures :

1. Suitable precautions are to be taken and training must be given to      people to for handling these materials to avoid accident.

2. Constant monitoring of the radiation level has to be carried out,        limit exposure to the workers.

3. Regular checks and control measures are done by Atomic Energy      Regulatory Board Under the Department of Atomic energy.

Labels:

Comments

Post a Comment

Popular posts from this blog

SIMPLE CARBURETOR - CONSTRUCTION AND WORKING

CONSTRUCTION OF SIMPLE CARBURETOR :  The main Components of Simple Carburetor are : Float Chamber, float, nozzle, venturi, throttle valve, inlet valve, and metering jet . In the float chamber, a constant level of petrol is maintained by the float and a needle valve.  The float chamber is ventilated to atmosphere.  This is used to maintain atmospheric pressure inside the chamber. The float which is normally a metallic hollow cylinder rises and closes the inlet valve as the fuel level in the float chamber increases to certain level. The mixing chamber contains venturi, nozzle and throttle valve. The venturi tube is fitted with the inlet  manifold. This tube has a narrow opening called venturi. A nozzle is provided just below the centre of this venturi. The nozzle keeps the same level of petrol as that of the level in the float chamber. The mixing chamber has two butterfly valves.  One is to allow air into the mixing chamber known as choke valve. The other is to al...
Post a Comment
Read more

MELTING FURNACES FOR FERROUS METALS : CUPOLA AND ITS WORKING

Various types of melting furnaces are used in different foundry shops, depending upon the quantity of metal to be melted at a time, and the nature of work that is carried out in the shop.  The primary objective in cupola is to produce iron of desired composition, temperature and properties at the required rate in the most economical manner. Besides, this furnace has many distinct advantages over the other types, e.g., simplicity of operation, continuity of production, and increased output coupled with a high degree of efficiency.  Description Of a Cupola : The Cupola Furnace consists of a vertical, cylindrical steel sheet, 6 to 12 mm thick, and lined inside with acid refractory bricks or acid tamping clay. The refractory bricks or the tamping clay used consist of  silicon oxide acid (SiO2) and alumina (Al2O3). The lining is generally thicker in the lower where the temperatures encountered are higher than in the upper region. The shell is mounted either on a brick work fo...
Post a Comment
Read more

ELECTRICAL COMPARATORS AND ITS WORKING

Electrical Comparators are used as a means of  detecting and amplifying small movements of a work contacting elements. An electrical comparator consists essentially of  a pick-up head or transducer for converting a displacement into a corresponding change in current and a meter or recorder connected in the circuit to indicate the electrical change, calibrated to show in terms of displacement. Generally, an amplifier is needed to provide the requisite sensitivity and to match the characteristics of different parts of  the circuit. Electrical comparators can be classified according to the electrical principle used in the pick-up head. Most of the comparators use either a differential transformer, an inductance bridge, a strain gauge or a capacitor as a means of detecting movement of the gauging element. There are different types of  electrical comparators. One kind called an electrolimit gauge is used to check or measure the outside diameter of a  roll. The objec...
Post a Comment
Read more