Methods to create Environmental Awareness

Environmental Awareness must be created through formal and informal education to all sections of the society. The various methods that is useful for raising environmental awareness are discussed here.

1. Environmental awareness in schools and colleges :

Environmental education must be imparted to the students in schools and colleges.

2. Through mass-media :

Media like Radio, TV and cable network can educate the people on environmental issues through cartoons, documentaries, plantation campaign, street plays.

3. Cinema :

Film about environmental education should be prepared and screened in the theatre compulsorily. This films may be released with tax free to attract the public.

4. News papers :

All the Newspaper as well as magazines must publish the environment related problems.

5. Audio - Visual Media :

To disseminate the concept of environment, special audio - visual and slide shows should be arranged in all public places.

6. Voluntary Organizations :

The services of the voluntary bodies like, Rotary club, NCC, NSS, should be effectively utilized for spreading the environmental awareness.

7. Traditional Techniques :

The Traditional Techniques like folk plays, dramas, may be utilized to spread environmental messages to the public. These techniques attract the rural people very much.

8. Arranging Competitions :

Story writing, essay writing and painting competitions on environmental issues should be organized for students, as well as for the Public. Attractive prizes should be awarded for the best effort.

9. Leaders Appeal :

Political leaders, cine actors and popular social reformers can make an appeal to the public about the urgency of environmental protection.

10. Non - Government Organizations (NGOs) :

Voluntary organization can help by advising the government about some local environmental issues. Also they can be effective in organizing public movements for protection of environment through creation of awareness.

Comments

SIMPLE CARBURETOR - CONSTRUCTION AND WORKING

CONSTRUCTION OF SIMPLE CARBURETOR : The main Components of Simple Carburetor are : Float Chamber, float, nozzle, venturi, throttle valve, inlet valve, and metering jet . In the float chamber, a constant level of petrol is maintained by the float and a needle valve. The float chamber is ventilated to atmosphere. This is used to maintain atmospheric pressure inside the chamber. The float which is normally a metallic hollow cylinder rises and closes the inlet valve as the fuel level in the float chamber increases to certain level. The mixing chamber contains venturi, nozzle and throttle valve. The venturi tube is fitted with the inlet manifold. This tube has a narrow opening called venturi. A nozzle is provided just below the centre of this venturi. The nozzle keeps the same level of petrol as that of the level in the float chamber. The mixing chamber has two butterfly valves. One is to allow air into the mixing chamber known as choke valve. The other is to al...

MELTING FURNACES FOR FERROUS METALS : CUPOLA AND ITS WORKING

Various types of melting furnaces are used in different foundry shops, depending upon the quantity of metal to be melted at a time, and the nature of work that is carried out in the shop. The primary objective in cupola is to produce iron of desired composition, temperature and properties at the required rate in the most economical manner. Besides, this furnace has many distinct advantages over the other types, e.g., simplicity of operation, continuity of production, and increased output coupled with a high degree of efficiency. Description Of a Cupola : The Cupola Furnace consists of a vertical, cylindrical steel sheet, 6 to 12 mm thick, and lined inside with acid refractory bricks or acid tamping clay. The refractory bricks or the tamping clay used consist of silicon oxide acid (SiO2) and alumina (Al2O3). The lining is generally thicker in the lower where the temperatures encountered are higher than in the upper region. The shell is mounted either on a brick work fo...

ELECTRICAL COMPARATORS AND ITS WORKING

Electrical Comparators are used as a means of detecting and amplifying small movements of a work contacting elements. An electrical comparator consists essentially of a pick-up head or transducer for converting a displacement into a corresponding change in current and a meter or recorder connected in the circuit to indicate the electrical change, calibrated to show in terms of displacement. Generally, an amplifier is needed to provide the requisite sensitivity and to match the characteristics of different parts of the circuit. Electrical comparators can be classified according to the electrical principle used in the pick-up head. Most of the comparators use either a differential transformer, an inductance bridge, a strain gauge or a capacitor as a means of detecting movement of the gauging element. There are different types of electrical comparators. One kind called an electrolimit gauge is used to check or measure the outside diameter of a roll. The objec...

Mechinopedia For Mechanical Engineers

Live chat

Search This Blog